Commands: Updated 2001-10-26 DISKDIR [ldev] ... display directory of LIF files on specified disk drive. Exit or // ... terminates program Help or ? ... displays this help TAPEDIR ... display directory of LIF files on specified tape. ---------------------------------------------------------------- Note: LIFDIR must reside in a group with PM capability. Sample use: 1) to look at a tape (on ldev 7): :run lifdir.pub.allegro; info="tapedir" (reply to TAPE with ldev 7) 2) to look at a disk drive (on ldev 1) :run lifdir.pub.allegro; info = "diskdir 1" LIFDIR: diskdir 1 LIF label: ID = Name = HPESYS Directory @ sector 417760 for 8 sectors VS = 00/00/00 @ 00:00:00 IPLA @ byte 12288 for 24576 RS = $00003100 LIF Directory () on raw LDEV 1: File# LIF File File Type Address Length Vol Created ----- --------- -------------- ------- ------ --- --------- 0 MMSAVE spectrum_ipl $30 $60 1 99/04/06 1 ISL spectrum_boot $65EF0 $F0 1 99/04/06 2 START spectrum_boot $38F950 $7568 1 99/04/06 ... 26 AUTOBOOT spectrum_auto $66000 $1 1 99/04/06 ... 30 STARTBASE spectrum_boot $38F950 $7568 1 99/04/06 # LIF Files = 31 The highest sector used by any LIF file is @ $00396eb7 3) to look at a another disk drive (on ldev 2) :run lifdir.pub.allegro; info = "diskdir 2" LIFDIR: diskdir 2 LIF label: ID = T Name = USER_SET Directory @ sector 0 for 0 sectors VS = 00/00/00 @ 00:00:00 IPLA @ byte 0 for 0 RS = $00000000 LIF Directory () on raw LDEV 2: File# LIF File File Type Address Length Vol Created ----- --------- -------------- ------- ------ --- --------- # LIF Files = 0 20170412